• Будь ласка, скопіюйте/вставте повідомлення про помилку, якщо ви бачите якесь на своєму екрані.

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Будь ласка, опишіть, що ви намагалися зробити, що зробили, та що трапилось

I tried reloading the game, but interface options were unchanged.

• Який у вас браузер?

• Будь ласка, скопіюйте/вставте текст відображений англійською замість вашої мови. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here. Чи цей текст доступний у системі перекладів? Якщо так, то чи перекладали його понад 24 години тому?

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Який у вас браузер?

• Будь ласка, поясніть вашу пропозицію точно й лаконічно, щоб було якомога легше зрозуміти, що ви маєте на увазі.

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Який у вас браузер?

• Що було на екрані до того, як ваша гра заблокувалася (Порожній екран? Частина ігрового інтерфейсу? Повідомлення про помилку?)

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Який у вас браузер?

• Які саме правила були порушені адаптацією гри на BGA

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Чи видні порушення правил на повторі гри? Якщо так, на якому кроці?

I tried reloading the game, but interface options were unchanged.

• Який у вас браузер?

• Яку ігрову дію ви намагалися виконати?

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Що ви намагались зробити, щоб активувати цю ігрову дію?

I tried reloading the game, but interface options were unchanged.

• Що сталося, коли Ви намагалися виконати цю дію (текст помилки, статус на панелі повідомлень, ...)?

n/a

• Який у вас браузер?

• На якому етапі гри виникла проблема (яка була на той момент вказівка в грі)?

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Що стається, коли ви намагаєтесь зробити ігрову дію (повідомлення про помилку, повідомлення на панелі статусу гри і т.п.)?

I tried reloading the game, but interface options were unchanged.

• Який у вас браузер?

• Будь ласка, опишіть візуальну помилку. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here.

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Який у вас браузер?

• Будь ласка, скопіюйте/вставте текст відображений англійською замість вашої мови. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here. Чи цей текст доступний у системі перекладів? Якщо так, то чи перекладали його понад 24 години тому?

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Який у вас браузер?

• Будь ласка, поясніть вашу пропозицію точно й лаконічно, щоб було якомога легше зрозуміти, що ви маєте на увазі.

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Який у вас браузер?